200LX 어플 자료실

정종우	(2002-10-22 16:24:12, Hit : 3348, Vote : 336)

irda200.zip (23.5 KB), Download : 66

HP 200LX IrDA Printer Drivers

오래전에 받아둔 파일인지라 새로운 버전이 나왔을런지 모르겠네요.
쓰임이 있으신 분은 SUPER에서 한번 검색해보심도... ^^

아래 첨부된 설명서입니다.
Ir포트 붙은 프린터는 구경도 못해본지라 사용법은 모르옵니다만...
그리 어려워 보이진 않는군요.
아... 한글문서는 프린팅 되지 않는 걸로 압니다.
영문문서만 가능하다고 들었네요.

=================================================================

HP 200LX   IrDA Printer Drivers

While HP pioneered infrared communication with its calculator and
Palmtop computer line, it joined with the IrDA (Infrared Data Association)
to extend that technology into a high speed protocol standard that is
beginning to be put into printers and accessory devices that work with
the printers. The devices are commonly called IrDA compliant devices.

The HP Palmtop built-in IR interface is HP proprietary SIR (serial
infrared interface). IrDA evolved several years after HP developed SIR,
and IrDA is not backward compatible to the HP proprietary SIR
in these machines.

However, now that IrDA is available in some printers and accessories
that work with printers, the need for IrDA drivers for the Palmtop has
come about. This set of files are IrDA printer drivers for the
HP 200LX. The drivers are not written for, and will not work on,
the HP 95LX or the HP 100LX.

Once installed on the HP 200LX, they replace SIR printing capabilities
of the HP 200LX. They do not affect the SIR file transfer capabilities
in FILER.

These driver files are put into the public domain and are unsupported.
Do not call Hewlett-Packard support lines, as no support organization
is trained or authorized to support these drivers.

Known limitations:
        The drivers are for printing only, not for file transfer.
        The drivers do not work on the HP 100LX or the HP 95LX. The
                drivers are written exclusively for the HP 200LX.
        The drivers do not work with IR printing accessories that are
                specifically designed to work with the built-in SIR of
                the Palmtop, such as, the Extended Systems JetEye
                ESI-9510A, ESI-9802A devices.
        Minimal testing has taken place, successfully printing to the
                HP LaserJet 5P printer and to the Extended Systems
                JetEye ESI-9580 device, both of which are IrDA compliant.
        Minimal testing has taken place, successfully from Memo, Filer,
                Appt, Phone, and Print Screen within System Manager.
        The drivers do not work in Lotus 1-2-3 or cc:Mail.
        The drivers do not work in DOS.
        On occasion, the printing connection may not be made, causing
                printing to fail. The printing appears to resume with
                a retries.
        No testing has taken place with other external drivers or TSR's
                loaded onto the HP 200LX.

Procedure to install these drivers on the HP 200LX
===================================================

- Copy LD.BAT, COMTSR.COM and LAMPTSR.COM into C:\
- Copy IRDA.TSR into C:\_DAT
- Copy your CONFIG.SYS and your AUTOEXEC.BAT from D:\ into C:\
- Edit your new C:\AUTOEXEC.BAT and add the following on the next line
  after the "call d:\bin\llras" statement" :-

                call c:\ld.bat

- Launch your SETUP application and press MENU-Options-System, then
  press ALT-A for the "Advanced" Option Dialog.
- Make sure that your Static Memory Option is set to at least 5.
  (Set to a higher value if you will be using other System Manager-
  Complaint TSR's.)
- Press F10 (for OK) to save your settings.
- Next, reboot your palmtop by pressing the CTRL, ALT, and DEL keys
  at the same time.
- When the message, "Press ALT for Boot Options ..." appears on the screen,
  quickly press the ALT key.
- A menu will appear.  Press 2 to choose the "Make C default drive; process
  startup files." option.
- You should see the boot up sequence for your palmtop with some messages
  showing that your IrDA drivers are installed.

Setting up your System Manager Applications to perform IRDA Printing
====================================================================

- Go into the Setup Application and choose MENU-Options-Printer
- You may choose the fastest baud rate of 115200 and select Infrared in
  the Interface section.  Make sure that you have selected the "HP LaserJet"
  in your Printer section if you wish to print to the HP LaserJet or the
  HP DeskJet range of printers.
- Press F10 to save your Settings.

Testing your installation
=========================

- Next, launch the MEMO application and use it to open the file,
  D:\AUTOEXEC.BAT
- Press MENU-F-P to open the MEMO Print dialog box.
- Point your HP 200LX IR port directly towards the IR receiver of your IrDA
  printer.
- Make sure that your HP 200LX is less than six inches from the IR receiver
  of your IrDA printer.
- Press the ENTER key to start printing.
- IrDA printing will now commence.

Public Dominion - Preliminary

Hewlett-Packard supplies the software and procedures herein without warranty
and will not be liable for damages arising from their use.

Last revision 09/25/95